Vista, CA

Arrived on site and performed AC/furnace maintenance on 2021 Lenox unit

System totals to $13,181 however client is only liable for payment for $7,181 as Tech Clean California Rebate will cover remaining $6,000 balance. (2) 15 amp breakers w/ 220v circuit 10 gauge required.

Upon arrival gave estimate for replacement of ducting. System has no seals at joints, standard filtration. 2 cut ins would need to be performed for supply. And one cut in for return on dry wall. System is operational, cools, just very little airflow in some vents.

Upon arrival gave estimate for replacement of ducting. System has no seals at joints, standard filtration. 2 cut ins would need to be performed for supply. And one cut in for return on dry wall. System is operational, cools, just very little airflow in some vents.

Upon arrival gave estimate for replacement of ducting. System has no seals at joints, standard filtration. 2 cut ins would need to be performed for supply. And one cut in for return on dry wall. System is operational, cools, just very little airflow in some vents.

Upon arrival gave estimate for replacement of ducting. System has no seals at joints, standard filtration. 2 cut ins would need to be performed for supply. And one cut in for return on dry wall. System is operational, cools, just very little airflow in some vents.

Upon arrival performed AC tune up. Cleaned condenser coils outside. Checked refrigerant levels, everything is in range. Condenser fan motor run amps are in range. Compressor has high start amps, adding a compressor assist kit would help Ampergess start low. System has no protection on. Primary and secondary control in range. System is operational upon completion

Upon arrival performed AC tune up. Cleaned condenser coils outside. Checked refrigerant levels, everything is in range. Condenser fan motor run amps are in range. Compressor has high start amps, adding a compressor assist kit would help Ampergess start low. System has no protection on. Primary and secondary control in range. System is operational upon completion

Upon arrival performed AC tune up. Cleaned condenser coils outside. Checked refrigerant levels, everything is in range. Condenser fan motor run amps are in range. Compressor has high start amps, adding a compressor assist kit would help Ampergess start low. System has no protection on. Primary and secondary control in range. System is operational upon completion

Upon arrival performed AC tune up. Cleaned condenser coils outside. Checked refrigerant levels, everything is in range. Condenser fan motor run amps are in range. Compressor has high start amps, adding a compressor assist kit would help Ampergess start low. System has no protection on. Primary and secondary control in range. System is operational upon completion

Arrived on site to perform AC diagnostic on Lennox system. Upon arrival homeowner states that zone two is no longer active on the S30 thermostat. Proceeded to upstairs to verify the thermostat was an active and found no screen being displayed at this time. Remove thermostat off the wall and tested for power and found 12 V DC present at thermostat. Re-insert thermostat on the wall and it came back online. Verified and tested system and ran it for approximately 20 minutes and no issues occurred. It appears the thermostat may have been loose on the wall or possibly banged causing the imperfect connection were it lost power. Cycled system five times and system ran fine with zone disconnection. Upon departure system is fully operational and cooling

Arrived on site to perform spring tune up on 3 unit. 8 year old good man unit and 2 mini splits. Client stated no issues. Washed condenser coil inside and out on all 3 units. Cleaned and washed and wiped down nothin inside and out side unit. Both unit were cooling at 20 degrees. Found no protection for no protection on either unit. Main home condenser checked electrical compartment and components. Found primary starter to be getting worn out as contact point are burning up from use and age. Secondary motor control is weak and really low and out of range. Fan motor is okay. Checked pressure and are good and holding and cooling home at 20 degrees. No protection on unit. Indoor unit filter was replaced recently by client. Blower we okay and motor is good. Drain lines are clear at this time and draining. All safety switches are operational. Unit is cooling at 20 degrees. No protection on indoor unit. Client signed up for a maintenance plan for 2 unit. She wanted to use today as her first v

Upon arrival performed maintenance. Cleaned entire condenser coils. Dusted off all electrical components. Coil was dirty. Recommended adding surge protectors. Circuit boards have some burnt spots. Refrigerant levels in range. Voltages and amperage’s good. Thermostat in working order. Filter needs to be replaced. System is operational upon completion.

Upon arrival performed maintenance. Cleaned entire condenser coils. Dusted off all electrical components. Coil was dirty. Recommended adding surge protectors. Circuit boards have some burnt spots. Refrigerant levels in range. Voltages and amperage’s good. Thermostat in working order. Filter needs to be replaced. System is operational upon completion.

Upon arrival performed maintenance. Cleaned entire condenser coils. Dusted off all electrical components. Coil was dirty. Recommended adding surge protectors. Circuit boards have some burnt spots. Refrigerant levels in range. Voltages and amperage’s good. Thermostat in working order. Filter needs to be replaced. System is operational upon completion.

Upon arrival performed maintenance. Cleaned entire condenser coils. Dusted off all electrical components. Coil was dirty. Recommended adding surge protectors. Circuit boards have some burnt spots. Refrigerant levels in range. Voltages and amperage’s good. Thermostat in working order. Filter needs to be replaced. System is operational upon completion.

Upon arrival performed maintenance on Lennox AC unit. Refrigerant levels in range . Client has some registers closed. Blower wheel has dust build up, advised cleaning, client said she can’t at the moment but next visit. Washed condenser coil. Checked amperage’s they are in range. Replaced filters client provided. Surge protectors in working order. Circuit board good. System is operational upon completion.

Upon arrival performed maintenance on Lennox AC unit. Refrigerant levels in range . Client has some registers closed. Blower wheel has dust build up, advised cleaning, client said she can’t at the moment but next visit. Washed condenser coil. Checked amperage’s they are in range. Replaced filters client provided. Surge protectors in working order. Circuit board good. System is operational upon completion.

Upon arrival performed maintenance on Lennox AC unit. Refrigerant levels in range . Client has some registers closed. Blower wheel has dust build up, advised cleaning, client said she can’t at the moment but next visit. Washed condenser coil. Checked amperage’s they are in range. Replaced filters client provided. Surge protectors in working order. Circuit board good. System is operational upon completion.

Upon arrival performed maintenance on Lennox AC unit. Refrigerant levels in range . Client has some registers closed. Blower wheel has dust build up, advised cleaning, client said she can’t at the moment but next visit. Washed condenser coil. Checked amperage’s they are in range. Replaced filters client provided. Surge protectors in working order. Circuit board good. System is operational upon completion.

Installed 40 amp breaker for new electrical panel to power condenser. Changed fuses in disconnect to match breaker. Tested equipment and recorded temperature splits. Measured voltages at outdoor unit.

Performed ac maintenance. Checked electrical components. Measured temperature split at 20degree. Changed filter. Cleaned outdoor coil and removed debris from condensor. Checked condensate line. Check safety components. Measured capacitor it is within range. Checked refrigerant levels. Unit is cooling an operational upon departure

Replaced the safety switch, tested the system 5 times and could not recreate the issue. Advising replacement of the low voltage line from the attic down. Includes new emt conduit and strapping down outside wall to condenser. This will eliminate any shorts that may exist in the wall and is not included with the install.

Performed heating maintenance on a 2002 Lennox gas furnace. Customer reports daily use of the system. Filter is clean. Upon entering the attic you can feel the breeze Of the furnace heating the attic space. Almost every collar on the supply plenum has open gaps. This is significantly effecting how long the system stays on. Resulting in higher than necessary energy bills. The inducer motor amps are well over max rating. This is going to cause issues In the future. Primary blower is amping ok and it’s battery is in range. Heat exchanger was checked today. The condition was discussed with homeowner. Homeowner is going to replace ductwork himself with home depot supplies. system is operational

Install valve and repipe gas line