Full-Service HVAC, Plumber & Indoor Air Quality in Hemet—With the Guarantees That Set Us Apart
Whether you're cooling your home through Hemet’s hot summers or dealing with hard water problems, Cool Air Solutions is your go-to provider for heating, cooling, plumbing, and indoor air quality services—all backed by rock-solid guarantees. From energy-efficient upgrades to emergency repairs, we’ve served Hemet families since 2006 with honest pricing, exceptional craftsmanship, and lasting peace of mind.
Need expert help? Send us your request online or call 951-234-0748 to schedule HVAC, plumbing, or IAQ service in Hemet today.
Heating and Cooling Services in Hemet
When temperatures rise—or suddenly dip—you need a dependable HVAC system to keep your comfort consistent. At Cool Air Solutions, we install, repair, and maintain systems designed for performance, energy savings, and long-term reliability.
-
AC Repair & Replacement: From poor airflow and loud noises to complete breakdowns, we restore cool air fast—or help you upgrade to a high-efficiency unit that fits your home and budget.
-
Furnace Installation & Repair: Whether you're upgrading your system or restoring heat during a chilly night, we provide safe, expert service for both electric and gas furnaces.
-
Ductless Mini-Splits: Ideal for rooms without ducts or zoned comfort, these compact systems give you powerful temperature control exactly where you need it.
-
Heat Pumps: These dual-function systems offer heating and cooling in one highly efficient package—perfect for Hemet’s mild winters.
-
Smart Thermostat Upgrades: Take control of your comfort and reduce your energy use with programmable and app-connected thermostats.
-
Seasonal Maintenance: Our tune-ups improve efficiency, reduce the risk of breakdowns, and help your system run better for longer.
-
Duct Services & Airflow Correction: We diagnose and correct issues that lead to uneven temperatures, poor air circulation, and energy loss.
Every HVAC installation includes our Lifetime Craftsmanship Guarantee, 1-Year Test Drive, No Lemon Guarantee, No Surprise Pricing, and our 24-Hour Fix-It Guarantee—if we can’t restore your comfort in 24 hours, we’ll pay for your hotel.
Hemet Plumbing Services
From aging pipes to water heater problems and hard water buildup, Hemet homes face a variety of plumbing challenges. That’s where our licensed professionals come in—delivering clear diagnoses, clean solutions, and lasting results.
-
Water Heater Repair & Replacement: We fix and install both tank and tankless water heaters so you always have hot water when you need it.
-
Slab Leak Detection & Repair: Using non-invasive methods, we identify hidden leaks under your foundation and provide fast, reliable repairs.
-
Fixture Services: We install and repair toilets, faucets, sinks, and showers with modern, water-efficient options that work better and last longer.
-
Pipe Repair & Repiping: If your home’s pipes are leaking, corroded, or outdated, we offer complete repiping solutions using durable materials like PEX or copper.
-
Water Filtration & Softeners: Hemet’s hard water can damage appliances and pipes—we install whole-home filtration systems to improve water quality and extend plumbing life.
-
Drain & Sewer Services: We clear stubborn clogs and prevent backups using camera inspections and high-powered hydro-jetting.
-
Garbage Disposal Services: Fast repairs or full replacements to keep your kitchen clean and efficient.
-
Backflow & Pressure Regulation: We ensure safe water supply and protect your home with expertly installed devices and valves.
Every job is backed by our Lifetime Craftsmanship Guarantee, so you’ll never have to worry about the quality of the work.
Indoor Air Quality Services in Hemet
With wildfires, allergens, and dust affecting Hemet homes, indoor air quality matters more than ever. We offer proven IAQ solutions that improve your health and comfort with every breath.
-
Whole-Home Air Purifiers: Eliminate bacteria, allergens, and pollutants throughout your entire home.
-
High-Efficiency Filters: Extended-surface media filters capture more contaminants than standard filters and help your HVAC system run more smoothly.
-
Humidifiers & Dehumidifiers: Proper humidity levels prevent dry skin, mold growth, and wood damage.
-
Duct Cleaning & Sealing: Clean and seal your ducts to improve airflow, reduce allergens, and boost HVAC efficiency.
-
Ventilation Upgrades: Improve indoor freshness by bringing in filtered outdoor air without sacrificing comfort or efficiency.
Why Hemet Homeowners Rely on Cool Air Solutions
We’ve earned the trust of thousands of homeowners throughout Riverside County with our commitment to quality, transparency, and long-term value. Here’s why Hemet residents choose us:
-
We know Hemet. From hard water to dry air, we understand the local challenges and design systems to meet them.
-
We work clean and fast. We show up on time, wear shoe covers, and leave no mess behind.
-
We explain everything. No pushy sales tactics—just honest options and real prices.
-
We invest in our team. Our in-house, background-checked pros meet the highest standards in the industry.
-
We back it up. With written guarantees and thousands of five-star reviews, our work speaks for itself.
Schedule HVAC, Plumbing, or IAQ Service in Hemet Today
Cool Air Solutions brings expert comfort, clean workmanship, and unmatched protection to every job in Hemet. Schedule your appointment with us online or call 951-234-0748 to get started today.
Recent Jobs and Reviews in Hemet, CA
Customers say: The overall sentiment expressed across these reviews is overwhelmingly positive, reflecting high levels of customer satisfaction and trust. Customers consistently praise the company for delivering professional, knowledgeable, and efficient service. A recurring theme is the technical expertise and personable nature of the technicians, who are described as respectful, friendly, and genuinely passionate about their work. Many reviewers highlight the quality of major installations, including complete HVAC system replacements and ductwork, noting impressive speed and precision even under challenging conditions. The company earns strong appreciation for their transparency, thorough documentation, and clear communication about necessary services versus optional ones. Long-term customer loyalty is evident, with clients expressing continued satisfaction over multiple years and repeated service calls. The responsiveness to inquiries and commitment to standing behind their work further reinforces the positive reputation. Overall, the tone is enthusiastic and grateful, with customers feeling valued and confident in the quality and reliability of the service provided.
Hemet, CA at a glance
Cool Air Solutions has completed 25 jobs in Hemet, CA in July 2022.
The most recent job was on July 22, 2022.
Cool Air Solutions has completed 8 jobs in Hemet, CA in the last 12 months. The first job there was in December 2016.
Our Local Reviews by City
- Aguanga, CA (5)
- Aliso Viejo, CA (1)
- Anaheim, CA (5)
- Banning, CA (2)
- Beaumont, CA (5)
- Bonsall, CA (9)
- Buena Park, CA (2)
- Canyon Lake, CA (27)
- Carlsbad, CA (59)
- Carson, CA (1)
- Cathedral City, CA (1)
- Chino, CA (2)
- Chino Hills, CA (4)
- Chula Vista, CA (13)
- Corona, CA (51)
- Del Mar, CA (3)
- Downey, CA (1)
- Eastvale, CA (1)
- El Cajon, CA (8)
- Encinitas, CA (5)
- Escondido, CA (119)
- Fallbrook, CA (65)
- Fontana, CA (2)
- Fountain Valley, CA (2)
- Fullerton, CA (2)
- Garden Grove, CA (5)
- Hacienda Heights, CA (1)
- Hemet, CA (73)
- Homeland, CA (9)
- Huntington Beach, CA (1)
- Irvine, CA (4)
- Jurupa Valley, CA (2)
- La Verne, CA (1)
- Ladera Ranch, CA (1)
- Laguna Hills, CA (5)
- Laguna Niguel, CA (2)
- Laguna Woods, CA (1)
- Lake Elsinore, CA (119)
- Lake Forest, CA (16)
- Lakeside, CA (5)
- Lakewood, CA (1)
- Lemon Grove, CA (1)
- Los Alamitos, CA (1)
- Menifee, CA (203)
- Mission Viejo, CA (8)
- Moreno Valley, CA (26)
- Murrieta, CA (670)
- Newport Beach, CA (1)
- Norco, CA (3)
- Nuevo, CA (2)
- Oceanside, CA (86)
- Ontario, CA (1)
- Pala, CA (1)
- Pauma Valley, CA (7)
- Perris, CA (24)
- Poway, CA (9)
- Ramona, CA (4)
- Rancho Cucamonga, CA (1)
- Rancho Santa Fe, CA (2)
- Rancho Santa Margarita, CA (2)
- Redlands, CA (4)
- Riverside, CA (36)
- San Bernardino, CA (4)
- San Clemente, CA (1)
- San Diego, CA (81)
- San Dimas, CA (1)
- San Jacinto, CA (28)
- San Juan Capistrano, CA (2)
- San Marcos, CA (48)
- Santa Ana, CA (3)
- Santa Fe Springs, CA (1)
- Solana Beach, CA (1)
- Spring Valley, CA (5)
- Sun City, CA (1)
- Temecula, CA (762)
- Temescal Valley, CA (1)
- Trabuco Canyon, CA (3)
- Upland, CA (2)
- Valley Center, CA (18)
- Vista, CA (161)
- Warner Springs, CA (5)
- Wildomar, CA (77)
- Winchester, CA (125)
- Yorba Linda, CA (14)
- Yucaipa, CA (5)
Job Locations and Reviews
Arrived on site to perform system inspection on a 2011 Goodman unit. Client stated she just bought home and no one is living in it at the time just wants to get inspected. Upon arrival spoke with client and she stated she just wants to make sure it’s running. She is unsure if she is going to stay in home or going to be getting another home and selling location. She stated unit runs. Cycled unit. Inspected electrical compartment components. Found starter pitting on contact points from operation and age. Recommend replacing before it gets worse. Secondary motor control is out of range and causing stress on compressor as it’s weak now. Fan side good. Fan motor has slight oil but is good and in range of amps. Checked start up on compressor. Start up are ok and in range. Run amps are good pulling 13 out of 19. Checked pressure as unit holds r-22 and is no longer in production. Unit holding a charge and cooling home at 24 degrees. Filter were replaced by handyman. Advised sound like u it
Arrived on site to perform spring tune up on a 2018 goat express unit. Client stated no issues unit is cooling good. Cycled cooling and is operational. Washed condenser coil inside and out. Checked electrical. Primary starter and secondary motor controls are both good and in range. Fan motor is good and amp are within range. Checked start up and are in range and starting to increase from normal operational and age. Run amps are good. Checked pressure and pressure are in range and cooling home at 19 degrees. Filter was replaced client supplied. Drain line sia good and clear. Blower assembly and wheel are good at This time. No protection inside or out and recommended adding some due to a lot of powerful outages recently that can damage or even short out systems and components. Cycled and went over over all findings and recommendations. She is aware and is interested but would like to see if she could add on to loan for heater and she would. Will be looking into it and if so she will like
Client stated there system kept icing up. Had home warranty’s out . Didn’t diagnose cause system was iced over. Found coil to be extremely dirty. Client hasn’t had a filter for 2 years. Declined repairs. System is operational.
Client stated there system kept icing up. Had home warranty’s out . Didn’t diagnose cause system was iced over. Found coil to be extremely dirty. Client hasn’t had a filter for 2 years. Declined repairs. System is operational.
Client stated there system kept icing up. Had home warranty’s out . Didn’t diagnose cause system was iced over. Found coil to be extremely dirty. Client hasn’t had a filter for 2 years. Declined repairs. System is operational.
Client stated there system kept icing up. Had home warranty’s out . Didn’t diagnose cause system was iced over. Found coil to be extremely dirty. Client hasn’t had a filter for 2 years. Declined repairs. System is operational.
Checked system diagnostics for operation. Measured refrigerant pressures static pressure and delta T.
Arrived on site to diagnose a no cooling 2003 unit. Client stated he know unit is old. He just moved in about 2 years. He stated unit was running but then everything shut off. Unit was not operational he checked his breakers and we’re not tripped. Inspected electrical compartment found no low voltage. Found low voltage fused popped. Replaced and tried to run unit. Then condenser was not turning. Checked power and found no power checked line power and was good. Load was not sending. Checked high voltage. Checked and found high voltage fuse bad as well. Replaced cycled unit and unit turned on. Ran for a bit then fuses tripped again. Replaced again and turned on unit then thermostat started to create smoke up. Pulled off fall and found circuit board in the thermostat be burnt up and causing the low voltage fuse to pop every time. Stated thermostat need to be replaced to stop fuse from popping. Ran unit and inspected condenser. Found stater burnt up and bad from age. Secondary motor con
Arrived on site to perform diagnostic on system. Upon arrival homeowner states his unit is leaking water out the sides, believes drain line is clogged. Went into attic and saw water still dripping from the corners. Evap coil is not accessible to look inside due to vent and framing. Could not locate where drain line is terminated to so I can try and verify if it in fact is clogged. Due to age it is possible that Unit drain pan can be cracked, but would definitely start with clearing of drain line to first verify that drain has a clear path for water to flow. Went over findings as well as start pricing for cut and clear. Because unit is so old, they are hesitant to put much money into it if it’s not an easy fix. They don’t use the system very much as they spend most of their time downstairs where they have another cooler. Homeowner is going to try to clear the line himself, and if that doesn’t work then they are just going to look into replacing the whole system. No other work per
GoodLeap Loan Documents will have no lien put on property & allow pre-payment of loans with no pre-payment penalty.
System is a window unit
System is a window unit
System is a window unit
System is a window unit
Arrived on site to perform diagnostic. Upon arrival homeowner mentioned that he got it figured it and his thermostat is bad, he bought a new one and would like for us to replace it. Advised that I could verify that it was the thermostat and then give him pricing, but he said he was confident that his thermostat is the issue. Gave him price to replace thermostat, at first said he would do it himself but after I told him there was a diagnostic fee anyways he agreed to have me do it. Replaced thermostat. Cycled for cooling. Unit came on and started cooling. Unit is extremely old and in very poor condition. Amp draws are high for compressor and motor. Motor has started to leak oil. Primary motor control is burnt and wires are showing stress as well. They are well aware of the condition of the unit and that it should be replaced, but it is not something they can do anytime soon and just need it to work as long as it can. System is operational upon departure, but can fail due to existing con
Client had someone come one out and replace primary starter, guy said system started but client thinks it never started. System keeps tripping breaker. Replaced secondary control and system still does not kick on. Advised tenant, wanted time to call home owner. Left message. System is non operational.
Client had someone come one out and replace primary starter, guy said system started but client thinks it never started. System keeps tripping breaker. Replaced secondary control and system still does not kick on. Advised tenant, wanted time to call home owner. Left message. System is non operational.
Client had someone come one out and replace primary starter, guy said system started but client thinks it never started. System keeps tripping breaker. Replaced secondary control and system still does not kick on. Advised tenant, wanted time to call home owner. Left message. System is non operational.
Client had someone come one out and replace primary starter, guy said system started but client thinks it never started. System keeps tripping breaker. Replaced secondary control and system still does not kick on. Advised tenant, wanted time to call home owner. Left message. System is non operational.
Upon arrival Performed diagnostic on 2020 carrier unit. Found system to kick on with no compressor. Client did mention they’ve had multiple black outs. System compressor and fan kick on good. Good ampergess. Very dirty filter. Cleaned out filter. System operational.
Upon arrival Performed diagnostic on 2020 carrier unit. Found system to kick on with no compressor. Client did mention they’ve had multiple black outs. System compressor and fan kick on good. Good ampergess. Very dirty filter. Cleaned out filter. System operational.
Upon arrival Performed diagnostic on 2020 carrier unit. Found system to kick on with no compressor. Client did mention they’ve had multiple black outs. System compressor and fan kick on good. Good ampergess. Very dirty filter. Cleaned out filter. System operational.
Upon arrival Performed diagnostic on 2020 carrier unit. Found system to kick on with no compressor. Client did mention they’ve had multiple black outs. System compressor and fan kick on good. Good ampergess. Very dirty filter. Cleaned out filter. System operational.
Arrived on site to diagnose a no cooling 2002 unit. Client stated he just moved in a couple months back and unit hasn’t worked and he Disney want to use home warranty cause they won’t cover anything. Inspected unit and had him cycled the thermostat and found the thermostat to not be on the wall correctly so would not turn on. Got it on the wall properly and condenser did not turn on. Inspected electrical found no high voltage on unit. Client stated he changed out the breaker himself and tested for power and there was no voltage going to condenser. Breakers are good. Found client had placed the 2 high voltage wires on a hole that where not meant to go and we’re not making a connection. Wires were pulled as they were not secure. Put. All on but advised disconnect should be replaced at minimum with a New wipe. Unit ran. Checked second control and is just out of range. Stater is good. Fan motor is okay some oil but in range of amps. Checked compressor and is pulling 14 out of 16. Ad
Arrived back on site to recover and adjust pressure down. Ran unit and started to remove refrigerant. Recover about 4 pounds. Brought pressure back down. Got low to 140 and high to 370. Advised we started at 210 on the low and 480 oh high. Unit Staters to run a bit better then it was before that was really inefficient. Had unit run for 15 mins once pressure dropped and home was now cooling at 21 degrees. Advised is better the. It was but unit is still running inefficient found unit to have a piston and should be a TXV. Advised past owners probably went really cheap replacing unit before they sold house. As unit will run but is not gunna be efficient due to Mix matched unit. Piston will not work properly with 410a and due to that advised unit may run as good as it can now but can’t guarantee unit won’t have other issues in future. Tenant stayed last month was over 750 on electricity bill and didn’t know why. Advised to Frank that he should consider replacement due to the inefficie