Vista, CA

Upon arrival performed diagnostic, found fuse to be burnt out. Client stated there was no power outages or black outs. Checked compressor & condenser fan . System is working good. Refrigeration is in range. Filter is clean. System is operational signed client up for Memebrship.

Upon arrival performed diagnostic, found fuse to be burnt out. Client stated there was no power outages or black outs. Checked compressor & condenser fan . System is working good. Refrigeration is in range. Filter is clean. System is operational signed client up for Memebrship.

Upon arrival performed diagnostic, found fuse to be burnt out. Client stated there was no power outages or black outs. Checked compressor & condenser fan . System is working good. Refrigeration is in range. Filter is clean. System is operational signed client up for Memebrship.

Upon arrival performed diagnostic, found fuse to be burnt out. Client stated there was no power outages or black outs. Checked compressor & condenser fan . System is working good. Refrigeration is in range. Filter is clean. System is operational signed client up for Memebrship.

When I arrived at unit, the condenser would turn on but no cooling. I started I’m the condenser cabinet and checked components thoroughly. They had a blown motor control that was causing house not to cool. I replaced motor control for new one and system took off. Then I checked starter out, starter is chattering really loud and black pitted. Owner approved me to go head and give him rebuild In cabinet. Charging today for motor control and starter.

Diagnostic for today . Will return with parts next week.

Upon arrival performed diagnostic, client had a bad secondary motor control. Has brand new contactor inside of system. Motor does have some oil leaking spots but is running good. Client has filter in 2 different spots advised just to have 1. System is operational upon departure. Client wanted to do bare minimum and thanked up for not tryna to upsell her.

Upon arrival performed diagnostic, client had a bad secondary motor control. Has brand new contactor inside of system. Motor does have some oil leaking spots but is running good. Client has filter in 2 different spots advised just to have 1. System is operational upon departure. Client wanted to do bare minimum and thanked up for not tryna to upsell her.

Upon arrival performed diagnostic, client had a bad secondary motor control. Has brand new contactor inside of system. Motor does have some oil leaking spots but is running good. Client has filter in 2 different spots advised just to have 1. System is operational upon departure. Client wanted to do bare minimum and thanked up for not tryna to upsell her.

Upon arrival performed diagnostic, client had a bad secondary motor control. Has brand new contactor inside of system. Motor does have some oil leaking spots but is running good. Client has filter in 2 different spots advised just to have 1. System is operational upon departure. Client wanted to do bare minimum and thanked up for not tryna to upsell her.

Upon arrival performed on Goodman system. System is cooling at about 69 degrees, refrigeration is running on lower 40s psi. Client said she has noticed this months ago. Client has had a leak repair done to the system before. And also recharged. Advised that there may be a different leak again somewhere in the system. Clients are gonna think it through. They think they might be good for a little might just ride it out. But will call us. Was using another company but didn’t call them. No reason.

Upon arrival performed on Goodman system. System is cooling at about 69 degrees, refrigeration is running on lower 40s psi. Client said she has noticed this months ago. Client has had a leak repair done to the system before. And also recharged. Advised that there may be a different leak again somewhere in the system. Clients are gonna think it through. They think they might be good for a little might just ride it out. But will call us. Was using another company but didn’t call them. No reason.

Upon arrival performed on Goodman system. System is cooling at about 69 degrees, refrigeration is running on lower 40s psi. Client said she has noticed this months ago. Client has had a leak repair done to the system before. And also recharged. Advised that there may be a different leak again somewhere in the system. Clients are gonna think it through. They think they might be good for a little might just ride it out. But will call us. Was using another company but didn’t call them. No reason.

Upon arrival performed on Goodman system. System is cooling at about 69 degrees, refrigeration is running on lower 40s psi. Client said she has noticed this months ago. Client has had a leak repair done to the system before. And also recharged. Advised that there may be a different leak again somewhere in the system. Clients are gonna think it through. They think they might be good for a little might just ride it out. But will call us. Was using another company but didn’t call them. No reason.

Upon arrival performed diagnostic. Found p trap to be compellty covered and restricted. Reworked the drains . And taped all of coil up compellty. Client declined Memebrship. System is operational model and serial numbers are off the system. Client says we been here before but there is no record. Client wants to do repairs but can’t right now.

Upon arrival performed diagnostic. Found p trap to be compellty covered and restricted. Reworked the drains . And taped all of coil up compellty. Client declined Memebrship. System is operational model and serial numbers are off the system. Client says we been here before but there is no record. Client wants to do repairs but can’t right now.

Upon arrival performed diagnostic. Found p trap to be compellty covered and restricted. Reworked the drains . And taped all of coil up compellty. Client declined Memebrship. System is operational model and serial numbers are off the system. Client says we been here before but there is no record. Client wants to do repairs but can’t right now.

Upon arrival performed diagnostic. Found p trap to be compellty covered and restricted. Reworked the drains . And taped all of coil up compellty. Client declined Memebrship. System is operational model and serial numbers are off the system. Client says we been here before but there is no record. Client wants to do repairs but can’t right now.

Upon arrival, performed condensate clear on 2 year old Lennox system. Found primary drain line to be clogged and condensation pan was full of water tripping the safety switch. Purged primary line and ran .5 gal of water through it. Absorbed as much water as I could from condensation pan. Upon departure, system is operational.

Performed diagnostic on system. Tenant states that unit has been cooling somewhat ok, but they have a major issue with the condensation drain. Unit has a secondary pipe that is piped out to come out of the coil, and just drips into the closet. This line is leaking like crazy the last couple days, and getting the whole closet and floors completely wet. Inspected and came to the conclusion that primary drain line is clogged. Homeowner has had secondary line dripping into a bucket. Evaluated outdoor unit and found a out of range secondary motor control. Also found that condenser motor is pulling high amperage. Compressor amp draws are high but within range, and working very inefficiently. Primary motor control is starting to buzz, and is pitted at contact points. Refrigerant levels are in within range. Overall system is very old and inefficient, and is definitely starting to show its age. Went over all findings and recommendations with homeowner over the phone. Also went over maintenance

Client stated no cooling -Technician found refrigerant to be nearly flat (R22) -Client is aware how expensive it is to repair a refrigerant leak, and is leaning towards replacement -Mateo is coming out tomorrow to provide replacement options

Client stated fan motor was really struggling to start and stay on -Technician arrived and found fan motor in very rough condition -I also found the secondary motor control to be out of range 1/7.5 mfd -Replacement of both parts was recommended -Client decided to replace secondary motor control only -They are also apart of our comfort club now -System is currently cooling, fan motor is still struggling -Filters were replaced

When I arrived at house, the owner mentioned to me that she’s been hearing loud squealing throughout day. I first opened the condenser cabinet and started checking all electrical components out. I checked amps for compressor and it was reading high, but not enough for squealing. Then I checked condenser fan motor amps and it was exceeding max amps for motor. The explanation for squealing is the fan motor. Fan motor is seizing up while running. I did a test run spin and motor only let propeller spin a half a turn. Motor is failing, once I brought up replacement to owner. Owner said that she just wanted me to diagnose so that husband can replace whatever part needed. They just wanted reassurance from technician. Charging only for diagnostic today.

When I arrived at unit, the condenser wouldn’t turn on. I first set a call for cool and turned back on breaker at breaker panel. I heard the fan motor struggle to turn but then it eventually did. I opened condenser cabinet and checked all electrical components. The starter was good, the motor control was reading full, and fan motor was drawing 1.6 amps. System still worked properly, then I took an amp draw on compressor. Compressor was reading 16 amps, but not high enough to trip breaker. The filters had been changed couple weeks ago also. Last check was breaker panel, I found a burnt spot behind 50 amp breaker. When I snapped it off, the back plated metal was all black. The metal piece that snaps in breaker was all corroded and couldn’t snap in breaker easy. Told owner the tripping breaker is coming from panel. He’ll call electrician now that he is aware and witnessed fry burns. Charging for diagnostic today.

Upon arrival client was concerned about green stuff around condenser. Just algi build up from condensation. Advised nothing to worry about. And thermostat is working completely fine and kicking on and off correctly. Client was more concerned about green outside. Washed out ckndnenser.