Murrieta, CA

heating maintenance on two comfort maker systems.

I was hired to perform heating maintenance on a residential property. I inspected the furnace, checked the thermostat, and tested the system for proper performance. There were no issues found and the furnace is working properly at this time.

Arrived to a customer's home to replace the outdated air conditioning and heating units, ensuring the new systems were the right fit for the home’s size and needs. After carefully removing the old units, they installed the new system, making sure all components were properly connected and tested for optimal performance.

Heating maintenance at a residential home. I inspecting the heating system and cleaned the burners to ensure optimal performance. The system was then tested to ensure it was working properly for the home. There were no issues found with the furnace.

Combo tune up

I performed a combo maintenance on two Lennox systems. All electrical components including fan motors, blower motors and compressors tested in range. Both systems operate, uninterrupted with the optimal temperature differentials. The systems were both clean inside, and I cleaned both outdoor coils. The upstairs unit air filter was clean. The downstairs one was dirty so I replaced it with a customer provided filter. I have forwarded digital copies of the reports with pictures to the email on the account. We thank you for being a Cool Air Solutions customer and look forward to doing your next maintenance! -Ryan Amat (Technician)

Heating and cooling maintenance

Furnace install

For this job I performed a combo maintenance on a 7 month old AC Pro split system Both: 1. Found static pressure to be higher than the manufacturer rating. After simulating a larger return the high pressure shifted to the supply side indicating that the ductwork is undersized. Recommended either changing the return grill and supply registers with bar types or speaking with a comfort advisor about duct replacement. 2. Did not change return filter as it is still clean. 3. Fund no surge protection on either indoor or outdoor units. Advised that if installed it will act as a shield to the unit in the event of any sudden power surges. Customer has opted not to move forward with recommendations at this time. System is operational in both heating and cooling upon departure. Thank you for choosing Cool Air Solutions.

Warranty on Goodman unit. Flame sensor

Performed heating maintenance on a heat pump package unit

I performed maintenance today on a Lennox furnace. I tested all mechanical, safety and performance systems. All electrical components and safety switch is tested in range including the fan motor. This system does not feature surge protection, which makes it prone to electrical damage. I replace the filter as it was dirty. There is an air purifying UV light in place, which is fully operational. Upon arrival, the system had a smooth start up in heating mode with an optimal temperature differential. I confirmed that the unit was operating once again upon departure. There were no issues other than the above mentioned surge protection. We would like to thank you for being a Cool Air Solutions customer! -Ryan Amat, Technician

Heating + Cooling Maintenance

Performed heating maintenance on a Lennox system

Carrier furnace maintenance. Checked safety features and routine tuneup.

Performed furnace maintenance on carrier 90% communicating system

Warranty on upflow in attic AC PRO

Member diagnostic on AC PRO furnace. Air orifice

Heating maintenance X3

Working

Working

Servicing 12 year old system

Dodge

Performed furnace maintenance on Lenox communicating system

Furnace maintenance. Tune up. 20 point inspection.