Hemet, CA

Upon arrival found thermostat not installed. Installed thermostat for customer. System is operational. Signed customer up for membership monthly. System is operational upon departure. Filter sized are 16x20x1 x2

Upon arrival found thermostat not installed. Installed thermostat for customer. System is operational. Signed customer up for membership monthly. System is operational upon departure. Filter sized are 16x20x1 x2

Upon arrival found thermostat not installed. Installed thermostat for customer. System is operational. Signed customer up for membership monthly. System is operational upon departure. Filter sized are 16x20x1 x2

Upon arrival found thermostat not installed. Installed thermostat for customer. System is operational. Signed customer up for membership monthly. System is operational upon departure. Filter sized are 16x20x1 x2

NO COOL. GOOGLE. Found system operational upon arrival. Customer stated unit wont stop running. She said it had been running for a day and a half. Found blower in the on position. Customer stated that they knew it was on but the fan wont turn on by itself. They stated it was the outside unit that wouldn’t shut down. Inspected outdoor unit and found unit frosting up. Checked indoor unit and found unit is not calling for cooling since fan is not running. Opened outdoor unit panel and the unit stopped. Edison box may have been malfunctioning or there may have been something pushing wires together. Board is not calling for cooling. Unit is original to the home. Parts show wear and tear. Unit uses r22 freon which is being phased out. Recommend looking into upgrading equipment soon due to efficiency and age of the unit. Customer also stated she wanted to have drain line cleared out. Before leaving customer wanted test unit again. Unit did not want to turn off again. Customer decided to g

Upon arrival performed diagnostic. Found coil to be dripping water through drain pan. Water is collecting in return air, water is starting to get built up in master bedroom floor. Water damage has been done to platform as well. Darren to come out between 11-2 for system replacement options.

Upon arrival performed diagnostic. Found coil to be dripping water through drain pan. Water is collecting in return air, water is starting to get built up in master bedroom floor. Water damage has been done to platform as well. Darren to come out between 11-2 for system replacement options.

Upon arrival performed diagnostic. Found coil to be dripping water through drain pan. Water is collecting in return air, water is starting to get built up in master bedroom floor. Water damage has been done to platform as well. Darren to come out between 11-2 for system replacement options.

Upon arrival performed diagnostic. Found coil to be dripping water through drain pan. Water is collecting in return air, water is starting to get built up in master bedroom floor. Water damage has been done to platform as well. Darren to come out between 11-2 for system replacement options.

Arrived on site to diagnose and 2007 York system with airflow issues. Condenser located in back yard. Furnace and evaporator coil located in attic. Spoke over with client upon arrival stated she is not getting barley any air flow in office and bed rooms. Stated she’s hasn’t had system serviced since w years ago. But they are uncomfortable and due to the condition of her mom and daughter they need good airflow and cool air in home. Had her cycled her system in cooling. System was operational but very little airflow in room. Advised I would be inspecting attic, ducting, indoor and outdoor units. Advised the summary of finding are as followed. Attic 1. Filter heavily dirty and restricted and long over due. 2. Found ducting to not have enough return and restricting air flow from entering system. 3. Insulation okay. 4. Supply ducting are unbalanced and not properly sized for room may need to upsize ducting to get air flow balance all through out home. 5. Ducting has a few Distributio

NO COOL/GOOGLE. Found system non operational upon arrival. Found unit outside not running. Checked indoor unit to check for communication between indoor and outdoor unit. System is calling for cooling properly. Checked for power outside and found no high voltage to unit. Checked breaker and found tripped. Reset and it tripped immediately. Gave customer options to repair and recommended replacement due to age. Customer declined all repairs. Unit NOT operational upon departure.

NO COOL/GOOGLE. Found system non operational upon arrival. Customer stated unit is not cooling and only blowing warm air. They have their parents home right now and need the air running. Upon inspection found compressor had tripped 1 leg of circuit. Reset and tested unit running. Found unit running on VERY HIGH amperage. Compressor was running at maximum capacity. HIGHLY recommend replacement options. Customer declined and chose to do option to try to keep system running longer. Explained to customer unit is on its last leg and needs to be replaced soon. Customer wants to try to keep unit running a little longer. Installed repairs and cycled and tested unit. Also clean outdoor coil to help unit run a little better. Unit is still running on high amperage, but it lowered a little. Customer has the option to use the repair today as credit if the unit fails again. We warranty our repair but only on the parts installed. Compressor, coil, freon, indoor coil, furnace were not replaced and are

Arrived on site to diagnose a no cooling 1986 inner therm system. That is not cooling or operational. Upon arrival spoke over with client and stated system was cooling yesterday and system no longer turns on or cools. Found indoor u it on and has power. Found out door unit not operational. Advised client I will inspection g out door unit. The summary of findings are as followed Condenser 1. 1986 Intertherm system. 2. Condenser not operational upon arrival. 3. Found fan motor completely covered in oil from leaking in past. 4. Secondary motor control for compressor and fan motor are both out of range from components over working and draining life of secondary control. 5. Found disconnect fuse popped and not allowing power to enter condenser. 6. Compressor is burnt up as it will not operate or turn on. 7. Compressor tripping breaker switches as it is bad now creating g a short to trip breaker. 8. R-22 refrigerant used that’s no longer in production and has been phased out by EPA. W

Upon arrival performed diagnostic. Found refrigerant lines to be frozen! Indoor coil completely frozen. Defrosted system performed diagnostic found system to be very low on charge. Advised client we can re chargebsystem to proper amount of refrigerant. Recommend doing leak dye if wanna get more time out of system. Customer declined to do work. Will speak about getting new system will call us. System is operational, not working properly, not cooling. System is original unit to home. Serial numbers and model numbers faded away.

Upon arrival performed diagnostic. Found refrigerant lines to be frozen! Indoor coil completely frozen. Defrosted system performed diagnostic found system to be very low on charge. Advised client we can re chargebsystem to proper amount of refrigerant. Recommend doing leak dye if wanna get more time out of system. Customer declined to do work. Will speak about getting new system will call us. System is operational, not working properly, not cooling. System is original unit to home. Serial numbers and model numbers faded away.

Upon arrival performed diagnostic. Found refrigerant lines to be frozen! Indoor coil completely frozen. Defrosted system performed diagnostic found system to be very low on charge. Advised client we can re chargebsystem to proper amount of refrigerant. Recommend doing leak dye if wanna get more time out of system. Customer declined to do work. Will speak about getting new system will call us. System is operational, not working properly, not cooling. System is original unit to home. Serial numbers and model numbers faded away.

Upon arrival performed diagnostic. Found refrigerant lines to be frozen! Indoor coil completely frozen. Defrosted system performed diagnostic found system to be very low on charge. Advised client we can re chargebsystem to proper amount of refrigerant. Recommend doing leak dye if wanna get more time out of system. Customer declined to do work. Will speak about getting new system will call us. System is operational, not working properly, not cooling. System is original unit to home. Serial numbers and model numbers faded away.

Performed AC maintenance on system. This was originally scheduled as a combo tune up, but once I advised homeowner that we would have to run the heater to do a furnace maintenance, she decided to do only AC maintenance today. Homeowner did mention that she does have home warranty to cover the system as she just bought the home 3 weeks ago. Cycled system for cooling. System is from 1995. Checked indoor and outdoor unit electrical and system components. Replaced 1 inch filter. System Is producing proper temperature split and Is cooling as it should. Outdoor compressor and condenser fan motor are pulling in high amps, making unit inefficient. Primary motor control is in good condition, secondary motor control is within range. Compressor is starting up fairly hard. Pulled off condenser fan motor and thoroughly washed out condenser coil inside and out. Cycled system . Went over findings and recommendations with homeowner. Due to her medical condition, she needs the ac to be working at all

Arrived on site to diagnose a 2017 Goodman unit. Condenser located in back yard. Furnace and evaporator coil located in attic. Client stated couple days ago he noticed home was getting warm and systems turn on but is not cooling. He stated out door unit makes loud buzzing noise when on so he has left it off since. Inspected indoor unit furnace is operating and has power inspected connections and wires and are all good. When out door inspected unit. Found compressor not turning on but system out door dose get power. Checked electrical wiring and components. Found primary control pittings burnt with dark tone discoloration from Normal operation of system. Recommend replacing to prevent future issues from components arching and burn up primary starter control. Found secondary completely dead and low as it’s was pulling 4.1 on here and was rated at lowest range 42.7. Which is reason why compressor will not turn on and cool home down advised client and told hi. I’d need to replace to g

Coming out next week to add leak dye. Added Freon to keep customer,er cooling.

Coming out next week to add leak dye. Added Freon to keep customer,er cooling.

Coming out next week to add leak dye. Added Freon to keep customer,er cooling.

Coming out next week to add leak dye. Added Freon to keep customer,er cooling.

Coming tomorrow morning to add leak dye and refrigerant. Ran out of freon

Coming tomorrow morning to add leak dye and refrigerant. Ran out of freon